Headless Pins, C3 - C3 | 0.0089" x 15mm

Headless Pins, D1 - D1 | 0.010" x 10mm

Headless Pins, D2 - D2 | 0.010" x 12.5mm

Headless Pins, D3 - D3 | 0.010" x 15mm

Headless Pins, E1 - E1 | 0.0124" x 15mm

Headless Pins, E2 - E2 | 0.0124" x 20mm

Headless Pins, E3 - E3 | 0.0124" x 25mm

Headless Pins, F1 - F1 | 0.0166" x 15mm

Headless Pins, F2 - F2 | 0.0166" x 20mm

Headless Pins, F3 - F3 | 0.0166" x 25mm

Headless Pins, G1 - G1 | 0.0179" x 20mm

Headless Pins, G2 - G2 | 0.0179" x 25mm

Headless Pins, G3 - G3 | 0.0179" x 30mm

Pinning Block - A wooden pinning block with three stages for setting labels at the same height.

Mounting cards, 3.5 x 11mm - Mounting cards in high quality Bristol Board. A water soluble glue should be used for mounting. 3.5 x 11mm (pointed), pack of 500

Mounting cards, 4.5 x 11mm - Mounting cards in high quality Bristol Board. A water soluble glue should be used for mounting. 4.5 x 11mm, pack of 500

Mounting cards, 5 x 14 mm - Mounting cards in high quality Bristol Board. A water soluble glue should be used for mounting. 5 x 14 mm, pack of 500

Mounting cards, 6 x 17 mm - Mounting cards in high quality Bristol Board. A water soluble glue should be used for mounting. 6 x 17 mm, pack of 500

Mounting cards, 10 x 21 mm - Mounting cards in high quality Bristol Board. A water soluble glue should be used for mounting. 10 x 21 mm, pack of 500

Mounting cards, 13 x 30 mm - Mounting cards in high quality Bristol Board. A water soluble glue should be used for mounting. 13 x 30 mm, pack of 250

Johnson Ranger Moth Trap - Made from 3/4" marine ply, this heavy duty box meets the Highways Agency specifications. Nest box survey schemes for dormice are important for survey monitoring, habitat enhancement and re-introduction schemes. These wooden boxes are ideal for all these purposes. Dormouse boxes should only be used if there is evidence that there are dormice in the area. Site boxes well away from public areas, near a potential routeway such as honeysuckle or leaning branches. Position approximately 2.5m above ground, on trees or other suitable support with the hole facing inwards. Use wire loops rather than nails so the boxes can be easily removed. NB Dormice are legally protected and must not be handled unless you have a licence to do so.

Johnson Safari Moth Trap - Made from 3/4" marine ply, this heavy duty box meets the Highways Agency specifications. Nest box survey schemes for dormice are important for survey monitoring, habitat enhancement and re-introduction schemes. These wooden boxes are ideal for all these purposes. Dormouse boxes should only be used if there is evidence that there are dormice in the area. Site boxes well away from public areas, near a potential routeway such as honeysuckle or leaning branches. Position approximately 2.5m above ground, on trees or other suitable support with the hole facing inwards. Use wire loops rather than nails so the boxes can be easily removed. NB Dormice are legally protected and must not be handled unless you have a licence to do so.

MV Skinner Trap - A robust, well built trap constructed of treated exterior ply with base. Easily assembled, it runs from the mains or 240V generator. Folds flat for easy storage or transportation. Clear plastic sliding top panels allow access to the catch without having to switch the bulb off. As mercury vapour bulbs have to cool before they can be switched on again, this is a very useful feature.

Actinic Skinner Trap, 240V - This trap is particularly suitable for garden use, or any situation where there will be people around the trap, as the light from the actinic bulb is much easier on the human eye than from an MV bulb. Otherwise this trap is very similar to the MV Skinner trap, constructed of treated exterior ply with base. Easily assembled, it folds flat for storage or transportation. It is designed so you can access the catch whilst the bulb is still on. This trap requires power from the mains or 240V generator.

Actinic Skinner Trap, 12V - This trap is particularly suitable for garden use, or any situation where there will be people around the trap, as the light from the actinic bulb is much easier on the human eye than from an MV bulb. Otherwise this trap is very similar to the MV Skinner trap, constructed of treated exterior ply with base. Easily assembled, it folds flat for storage or transportation. It is designed so you can access the catch whilst the bulb is still on. This trap requires power from a 12V power source such as a small motorbike battery or generator.

Plastic Bucket Heath Trap - A small, portable trap particularly suited to trapping at remote sites, as it is light and runs from a 12 volt supply (a small motorbike battery will power a trap all night). The light source is a white actinic tube. Catches tend to be lower than with a mercury vapour trap but this is still a very useful trap, particularly if trapping takes place over a number of nights or if several traps are used within the recording area. This is a 12V trap which will run from a 12V supply. Adapter required to run from mains.

Aluminium Heath Trap - A small portable trap ideal for trapping in remote locations. The catch rate is lower than the Skinner but the same species can be caught by trapping over a number of nights. This lightweight aluminium heath trap is completely collapsible, folding flat for convenient storage or transportation. This is a 12V trap which will run from a 12V supply such as a small motorbike battery. Adapter required to run from mains.

Robinson Moth Trap - A high quality mercury vapour trap suitable for permanent sites, but which can also be used in the field with a generator. This trap is particularly suited to unattended overnight operation as it retains the moths after dawn. This is a 240V trap which requires power from the mains or generator.

Mercury Vapour Electrics (240V) - 125 watt control unit with 1m cable wired mains plug, bulb holder, 125 watt MV bulb, 6 metres of cable and socket for connecting bulb to control unit.

Actinic Electrics (240V) - For use with 240V mains or generator. Mains control unit with plug and 15 watt actinic bulb with bulb connectors and cabling.

Marking Paint, Blue - Single tub of blue paint.

Set of 5 Marking Pens - Water-based, non-toxic, non-fade and quick drying pens, with built in agitator which mixes the paint prior to use. One each of 5 colours.

Marking Pen, White - Single marking pen, white

Marking Pen, Yellow - Single marking pen, yellow

Marking Pen, Red - Single marking pen, red

Marking Pen, Green - Single marking pen, green

Marking Pen, Blue - Single marking pen, blue

Morpho pins, stainless steel, type 000 - 38mm x 0.25mm

Morpho pins, stainless steel, type 00 - 30mm x 0.30mm

Morpho pins, stainless steel, type 0 - 38mm x 0.35mm

Morpho pins, stainless steel, type 1 - 38mm x 0.40mm

Morpho pins, stainless steel, type 2 - 38mm x 0.45mm

Morpho pins, stainless steel, type 3 - 38mm x 0.50mm

Morpho pins, stainless steel, type 4 - 38mm x 0.55mm

Morpho pins, stainless steel, type 5 - 38mm x 0.60mm

Morpho pins, stainless steel, type 6 - 38mm x 0.65mm

Morpho pins, stainless steel, type 7 - 38mm x 0.70mm

Morpho pins, black, type 000 - 38mm x 0.25mm

Morpho pins, black, type 00 - 38mm x 0.30mm

Morpho pins, black, type 0 - 38mm x 0.35mm

More..