BatSound Upgrade - Upgrade to v3.31 from any previous version
TrailMaster Strap - Spare or replacement webbing strap. 115cm long.
TM25V - TM25V replacement 25' video camera cable
TM25VE - Replacement 25' cable which connects the video camera housing to a trail monitor.
TrailMaster Camera Tripod - Fully adjustable mini-tripod with velcro strap to fasten around a branch.
TM Video Light - For night work, an additional light and light controller with clear lens, red lens and infrared lens.
TM25 cable - TM25 replacement 25' camera cable
TM Weatherproof Video Camera Housing - A waterproof housing suitable for a Sony Handycam or similar camcorder, constructed of high-impact plastic with visible weathertight seal and spring-loaded fasteners for easy access to the camera. The camera mounting platform slides out for convenience. Comes complete with fully adjustable mounting bracket for attachment to a post or tripod, and built-in connecting cables. For night work a light and light controller is also available.
TM700v-RT - A trail monitor similar to the TM700v but with an additional input for a remote trigger to start and stop the video recording. For example the remote trigger could be a TM Intervalometer which would give time-lapse control over the video camera. Alternatively an active trail monitor system (ie one of the TM1550 models) could be set up so that an animal crossing a trail prior to entering the filming area would start the video camera, ensuring that all the activity in the area is captured on film.
TM700v - This passive-system trail monitor intelligently controls and monitors a vidow camera, as well as recording events just like other TrailMaster passive infrared systems. It can be used with other TrailMaster accessories. The monitor can be set up to turn on the video camera when an animal enters the monitored area. The camera can record a short burst, or can stay on as long as heat and motion are still detected. With a 2-hour tape, the unit can remain in the field for weeks at a time. The camera can be situated up to 25 feet away from the monitor allowing different angles to be used, and for it to be well concealed.
TM Multi-Camera Trigger II - This control box will trigger up to three cameras simultaneously each time the infrared beam is broken, so photographs can be taken from more than one angle at once. Each box will trigger up to three cameras and two or more boxes can be daisy-chained together to add even more cameras.
TM Intervalometer - A time-lapse control unit for advanced camera controls, the intervalometer has an accurate internal clock/timer. It can be set to trigger the camera whenever the infrared beam is broken, 24 hours a day, or only during one or two selected time zones. A delay interval between photographs may be set, from 6 seconds to 98 minutes. There is an adjustable limit of photographs that may be taken, from 20 to 250. You can also control the number of photographs taken at each interval by adjusting the electronic shutter release, for 0.5 to 10 seconds, when the camera is in continuous mode. Supplied with cable to connect to the TM35-1 camera kit. NB The intervalometer is a camera controller NOT a trail monitor.
TM Event Data Record Pad 5-Pack - Pack of 5 pads
TM Event Data Record Pad - Pack of 5 pads
TM1550-PS-Bat - With advanced camera controls and adjustable transmitter
TM DataCollector - A datalogger used to retrieve and store data collected by TrailMaster infrared trail monitors, the TM DataCollector is connected by a cable to each monitor and the data is transferred. This allows the trail monitors to remain operational in the field while collected data is being analysed and also saves having to read event data off manually from each unit. The device can hold up to 16,000 events which can be collected from different monitors. The data is stored by unit numbers, making it easy to keep track of data from various locations. The TM DataCollector is designed to be used with TM StatPack analysis software. However it will connect to any computer with a standard RS232 interface.
TM StatPack - The TM StatPack software package is used to analyse event data from the TM DataCollector or from individual trail monitors. The software runs under Windows on any PC and allows data to be downloaded and analysed in the form of graphs and tables to clearly show patterns of animal movement. The data can be easily incorporated into reports or used to make comparisons between different site or from one recording period to the next.
TM1550 - Records 1000 events.
TM1550-4k - Records 4000 events
TM1550-8k - Records 8000 events
TM1550-16k - Records 16000 events
TM1550-PS - With advanced camera controls, allowing you to select how many photographs are taken once an event is registered, and the delay between each photograph. The delay interval can be set from 6 seconds to 98 minutes. The PS model also allows you to select how long the camera activation signal lasts, so if you are using a camera in continuous picture mode, you can select how many photographs will be taken in one burst.
TM1550-Bat - Specialist bat monitor with adjustable transmitter
TM300 Passive Trail Monitor - This basic passive system is a high-quality cost effective monitor which will record one event per minute as long as an animal is moving in the area. It will store up to 1000 events in its non-volatile memory. The TM300 is compact and very easy to use and event data can be read off manually by scrolling through its history.
TM550 - Memory capacity 1000 events
TM550-4K - Memory capacity 4000 events
TM1050 Active Trail Monitor - A second-generation two-piece active infrared trail monitoring system which will record up to 1000 events. Compact, rugged and easy to set up the active system means it can be easily set to record a specific type of animal.
TM550-8k - Memory capacity 8000 events
Pettersson Bat Detector Case - Spare/replacement padded protective carry case with belt loop and adjustable neck strap. Fits D200, D230 and D240X detectors.
BatScan - Sound analysis software for the Batbox Duet which lets you record and play back sound samples, and analyse and display audio spectograms (similar to sonograms). BatScan processes digital audio data such as .wav sound files and the CD includes 12 reference calls. The default settings have been optimised for use with the Duet bat detector but this software can also be used with any other frequency division or time expansion detector. In order to record and play back sound samples you will need a Windows compatible sound card installed. However a sound card is not necessary in order to analyze and display audio spectograms.
BatSound v3.31, single user - BatSound v3.31 | Single user
BatSound v3.31, 2-user licence - BatSound v3.31 | 2-user licence
BatSound v3.31, 3-user licence - BatSound v3.31 | 3-user licence
BatSound v3.31, 5-user licence - BatSound v3.31 | 5-user licence
Leatherette Bat Detector Case - A zip-around leatherette case with handy belt loop.
TM35-1 Camera Kit - This camera kit is designed to work with TrailMaster equipment to produce good quality photographs, yet be simple to set up. The specially adapted Canon Sure Shot 35mm camera is completely weatherproof and fully automatic. It has a 32mm f3.5 lens, autofocus (0.45m to infinity), autoflash, autowind and date feature which prints the time and date of each event on the photograph. The intelligent autofocus system uses 3 focus sensors to provide maximum sharpness and clarity even when the subject is slightly off-centre or on the move. The camera can be sited up to 25' away from the trail monitor, allowing selective monitoring of an area, while using the camera to photograph the whole area. The camera can be controlled by a trail monitor or by the TM Intervalometer. Using a trail monitor the camera will take pictures each time the beam is broken, either 24 hours a day, or during one or two selected time periods. The TM1550-PS models have advanced camera controls allowing greater flexibility. The camera can also be used on its own as a normal camera. Camera takes 1 x CR123A battery (included) which will last for approximately 18 x 24-exposure rolls with 50% flash use.
Stereo Lead - This lead connects a tape recorder or minidisc to a bat detector.
Pettersson D-980/3 Professional - Signal storage time of 3 seconds
Pettersson D-980 3/12 Professional - Signal storage times of 3 and 12 seconds.
Pettersson D-240x - Truly a state-of-the-art bat detector utilising the most advanced Electret microphone. Both time expansion and heterodyne capabilities allow the recording and analysis of all aspects of a bat's call. You can make short recordings directly to tape with a simple on/off control, or set the detector to record continuously. Additonal features include the automatic or manual triggering of the detector (with a variable threshold setting), and automatic control of attached tape recorder, through a relay, allowing it to be left in situ to remotely record bat activity. Includes padded carry case, strap and 9v battery.
Tranquility Transect - This budget time expansion detector is designed for recording directly to tape. It has no loudspeaker and uses headphones for listening to the time expanded call. To keep costs to a minimum, it has no heterodyne system (unlike the Pettersson models) so cannot be used for listening in real-time, but is ideal for making recordings only. It uses a very high quality wide capacitance microphone and incorporates an EEPROM chip for upgrading the internal software. The detector can be carried using a neck halter cord for hands-free use.
256Mb CompactFlash Memory Card - This budget time expansion detector is designed for recording directly to tape. It has no loudspeaker and uses headphones for listening to the time expanded call. To keep costs to a minimum, it has no heterodyne system (unlike the Pettersson models) so cannot be used for listening in real-time, but is ideal for making recordings only. It uses a very high quality wide capacitance microphone and incorporates an EEPROM chip for upgrading the internal software. The detector can be carried using a neck halter cord for hands-free use.
CF Reader/Writer - CF reader/writer
PC Card Adapter for CompactFlash - Use this adapter to read and write files to your CompactFlash card through a PCMCIA slot. Ideal for use in a laptop computer. It's easy to use - simply insert your CF card into the adapter, then into your PCMCIA slot. Works with Windows and Macintosh operating systems. No drivers are required.
AnaBat CF Storage ZCAIM - This unit uses compact flash memory cards (the same type as used in digital cameras) to store bat call data. A 128Mb CF card should record about 2 weeks' worth of data in continuous use. The unit also has timer facilities so it can be programmed to switch on and off automatically, simultaneously switching the bat detector on and off. The software for reading the memory card and extracting AnaBat files will now work on computers using any version of Windows from Windows 95 and later. CF memory card and CF reader/writer required.
128Mb CompactFlash Memory Card - This unit uses compact flash memory cards (the same type as used in digital cameras) to store bat call data. A 128Mb CF card should record about 2 weeks' worth of data in continuous use. The unit also has timer facilities so it can be programmed to switch on and off automatically, simultaneously switching the bat detector on and off. The software for reading the memory card and extracting AnaBat files will now work on computers using any version of Windows from Windows 95 and later. CF memory card and CF reader/writer required.
AnaBat II Leather Carry Case - Leather carry case
Batbox Duet - This is a dual functioning bat detector, with both heterodyne and frequency division. Designed for single-handed operation, the Duet is very easy to use with its large, accurate backlit LCD frequency display. Through the speaker or headphones, you only hear the heterodyne signal. When recording, the frequency division signal is recorded on to the left channel and the heterodyne on the right channel.
Pettersson D-230 - A combined heterodyne and frequency division detector. Using stereo headphones, the heterodyne call is heard on the left channel and the frequency division on the right channel. Because the D-230 allows you to hear the frequency division signal through the speaker/headphones, it is possible to scan all frequencies at once and then switch to heterodyne mode to identify the specific frequency.
AnaBat II Bat Detector - The AnaBat detector itself is a frequency division detector with 4 switch-selectable division ratios and calibration tone for testing tape speed variations. The detector can be used on its own, and software is included, but in order to analyse calls on a computer, an AnaBat CF Storage ZCAIM unit is required.
More..
