SP30 Eyepiece x10 Widefield - An affordable pH meter which makes it easy for both technical and non-technical people to measure pH on the spot. Temperature is displayed simultaneously and is automatically compensated for. 5 buffer values are memorised and the meter has a fully automatic calibration procedure with 1 or 2 point calibration. The electrode is replaceable and is easily changed when exhausted by a snap-in replacement. Battery life is monitored and the meter will switch off automatically should you leave it on accidentally. Fully sealed against water and dust and it floats if accidentally dropped into liquid. Supplied with protective cap, electrode removal tool, batteries and instructions. To use this meter you will also need a pH buffer solution for calibration, and storage solution for the electrode.

SP30 Eyepiece x15 Widefield - An affordable pH meter which makes it easy for both technical and non-technical people to measure pH on the spot. Temperature is displayed simultaneously and is automatically compensated for. 5 buffer values are memorised and the meter has a fully automatic calibration procedure with 1 or 2 point calibration. The electrode is replaceable and is easily changed when exhausted by a snap-in replacement. Battery life is monitored and the meter will switch off automatically should you leave it on accidentally. Fully sealed against water and dust and it floats if accidentally dropped into liquid. Supplied with protective cap, electrode removal tool, batteries and instructions. To use this meter you will also need a pH buffer solution for calibration, and storage solution for the electrode.

Wedmore SP14 Compound Microscope - A robust compound microscope with quadruple objective turret, RMS standard thread achromatic objectives, rack and pinion coarse and fine focus controls, and separate substage Abbé condenser with iris diaphragm and filter carrier. The specimen stage is square, with side clips, and can accommodate a mechanical specimen driver. Illumination is by a 15 watt substage lamp. The SP14 has x4, x10, x40 and x100 (oil) achromatic objectives and x5, x10 and x12.5 eyepieces, giving a magnification range of x20 to x 1250. Magnification can be increased to x2000 using optional additional eyepieces. Supplied complete with wooden case.

Lumagny Illuminated Microscope - A light pocket-sized illuminated microscope with x30 magnification, easily focused with the focusing wheel. The illumination means it can also be used as a torch. Supplied in vinyl case. Requires 2 x AA batteries (not included). 13.5cm long.

TrekLink - Photo adapter connects the Trekker or Readiview microscope to any SLR camera, film or digital - so you can photograph what you see through the microscope. The camera must have a removeable lens. You will also require a T-mount suitable for your camera (available from camera stores).

Trekker Hard Case - A hard plastic case to protect your Trekker when not in use, with foam padding inside.

Motic DS-300 Digiscope - DS-300 Kit includes: The DS-300 digital microscope is superb for introducing children to the world of microscopy. With a magnification range of 20-100 times the microscope is suitable for viewing both small objects such as flowers and prepared slides. Attach the included Motic 300 digital camera and connect to your PC and images can be viewed on your PC screen in full colour. The DS-300 kit includes the intuitive 'Motic Play' software allowing the young user to save, send, modify and share images. A powerful LED lighting system operates up to 50 hours on 3 x AA batteries giving illumination from above or below the specimen with adjustable intensity. Motic Play software (included with DS-300) is imaging software designed for children using the digiscope. It uses pictures and sounds to help children capture and edit still images and videos and has many other powerful features. Images can be measured, text and effects added, e-mailed and printed. The software includes a step by step picture help section that covers all of the functions.

IMXZ Binocular - IMX series microscopes are similar in design to the MX series, but have a significantly larger stand for stability and a more robust construction. The stereohead can rotate 360° around the stand pole, giving greater flexibility for analysis purposes, and can be clamped in any preferred position. The inbuilt quartz halogen incident and transmitted illumination may be used together or independently. The angle of the incident illuminator is adjustable. All IMX models have a reversible black and white stage plate, plus frosted glass stage plate with blue filter for transmitted illumination. Focus tension adjustment, dioptric eyepiece adjustment, eyecups, dust cover and dissection plate come as standard. The IMXZ stereo head has double side arm zoom controls providing a continuous magnification range of x10-x40 as standard.

IMXZ Trinocular - Ideal for use with camera or minicam

IMXZ Binocular Long Arm - Long arm provides greater working distance

IMXZ Trinocular Long Arm - Ideal for use with a camera or minicam, with a long arm providing greater working distance.

IMX x1.5 Supplementary Objective - (IMXZ zoom models only)

IMX x0.5 Supplementary Objective - (long arm models only)

IMX Eyepieces x5 Pair - (long arm models only)

IMX Eyepieces x15 Widefield - (long arm models only)

IMX Eyepieces x20 Widefield - (long arm models only)

IMX x10 Measuring Eyepiece - (long arm models only)

IMX Stage Micrometer - An accurately etched ruler in the centre of a microscope slide for calibrating measurements.

IMX Gem Clamp - A clamp for holding small items such as gemstones. Picture shows gem clamp with darkfield attachment.

IMX Darkfield Attachment - Converts transmitted illumination to darkfield for gem and crystal work. Picture shows darkfield attachment with gem clamp.

IMX Case - A practical microscope carrying case, filled with pre-shaped support foam. (NB Does not fit long arm models).

IMX SLR Camera Adapter - Virtually all SLR 35mm cameras are suitable for taking conventional photographs down a microscope, using an SLR camera adapter. SLR digital cameras/camcorders with removable lenses can be attached to a microscope in the same way. The SLR camera adapter needs to be connected to the lens fitment with a T2 ring.

IMX T2 Ring - A connecting ring which links the SLR camera adapter to a particular camera model.

IMX CCTV Camera Adapter - An adapter which screws into the front of the CCTV camera (eg JVC) and slides into the eyetube of a microscope to allow easier viewing on a TV screen for larger audiences such as school classes.

IMX CCTV Camera Adapter with Reducing Lens - An adapter which screws into the front of the CCTV camera (eg JVC) and slides into the eyetube of a microscope to allow easier viewing on a TV screen for larger audiences such as school classes. The reducing lens restores the field of view to that normally observed though the microscope eyepiece.

Motic LM-100 Field Microscope - Motic LM-100 Field Microscope Kit LM-100 Kit includes: Perfect for the younger scientist who wants a truly portable microscope. The LM-100 gives a massive x20-x100 magnification, is simple to operate and will provide children with a fascinating window into the microscopic world. It can be used to view prepared specimen slides, larger objects such as rocks, insects, plants and pond water samples. 3 mode illumination provides top lighting, bottom lighting or a combination of both all with adjustable intensity. Complete with a range of accessories and soft carry case.

MX-3 Stereomicroscope - Combining durability with value for money, these stereomicroscopes have inclined binocular heads for ease of use, with dioptric adjustment, and variable interocular distance. All models have a reversable black and white stage plate, and models with inbuilt transmitted illumination also have a frosted glass stage plate. Rubber eyecups and dust cover are provided as standard. MX models are particularly suited to photomicroscopy, and can be used for 35mm or digital photography, CCTV or video recording. The MX-3 has inbuilt transmitted and incident lighting. Standard magnification x20.

BM-1 Long Arm Stereomicroscope - This microscope is ideally suited to the examination of large specimens with its exceptional working distance and versatile long arm stand. The microscope body is supported at the end of the horizontal arm. The swivel action may be clamped to allow the stereohead to be tilted to a convenient angle. The heavy stable base contains a low voltage transformer and switch to supply the three-lens tubular spotlight. The spotlight is attached by an adjustable arm, ensuring illumination of the specimen irrespective of the stereohead position.

BM-1 x3.5 Widefield Objectives - This microscope is ideally suited to the examination of large specimens with its exceptional working distance and versatile long arm stand. The microscope body is supported at the end of the horizontal arm. The swivel action may be clamped to allow the stereohead to be tilted to a convenient angle. The heavy stable base contains a low voltage transformer and switch to supply the three-lens tubular spotlight. The spotlight is attached by an adjustable arm, ensuring illumination of the specimen irrespective of the stereohead position.

BM-1 Eyepieces x5 Paired - This microscope is ideally suited to the examination of large specimens with its exceptional working distance and versatile long arm stand. The microscope body is supported at the end of the horizontal arm. The swivel action may be clamped to allow the stereohead to be tilted to a convenient angle. The heavy stable base contains a low voltage transformer and switch to supply the three-lens tubular spotlight. The spotlight is attached by an adjustable arm, ensuring illumination of the specimen irrespective of the stereohead position.

BM-1 x15 Widefield Eyepieces - This microscope is ideally suited to the examination of large specimens with its exceptional working distance and versatile long arm stand. The microscope body is supported at the end of the horizontal arm. The swivel action may be clamped to allow the stereohead to be tilted to a convenient angle. The heavy stable base contains a low voltage transformer and switch to supply the three-lens tubular spotlight. The spotlight is attached by an adjustable arm, ensuring illumination of the specimen irrespective of the stereohead position.

BM-1 Eyepieces x20 Widefield - This microscope is ideally suited to the examination of large specimens with its exceptional working distance and versatile long arm stand. The microscope body is supported at the end of the horizontal arm. The swivel action may be clamped to allow the stereohead to be tilted to a convenient angle. The heavy stable base contains a low voltage transformer and switch to supply the three-lens tubular spotlight. The spotlight is attached by an adjustable arm, ensuring illumination of the specimen irrespective of the stereohead position.

BM-1 x10 Measuring Eyepiece - This microscope is ideally suited to the examination of large specimens with its exceptional working distance and versatile long arm stand. The microscope body is supported at the end of the horizontal arm. The swivel action may be clamped to allow the stereohead to be tilted to a convenient angle. The heavy stable base contains a low voltage transformer and switch to supply the three-lens tubular spotlight. The spotlight is attached by an adjustable arm, ensuring illumination of the specimen irrespective of the stereohead position.

BM-1 Stage Micrometer - An accurately etched ruler in the centre of a microscope slide for calibrating measurements.

BM-1 Spare Bulb - An accurately etched ruler in the centre of a microscope slide for calibrating measurements.

BM-1 SLR Camera Adapter - Virtually all SLR 35mm cameras are suitable for taking conventional photographs down a microscope, using an SLR camera adapter. SLR digital cameras/camcorders with removable lenses can be attached to a microscope in the same way. The SLR camera adapter needs to be connected to the lens fitment with a T2 ring.

BM-1 T2 Ring - A connecting ring which links the SLR camera adapter to a particular camera model.

BM-1 CCTV Camera Adapter - An adapter which screws into the front of the CCTV camera (eg JVC) and slides into the eyetube of a microscope to allow easier viewing on a TV screen for larger audiences such as school classes.

BMS Trinocular Zoom Stereomicroscope - The BMS has a large stable base and quartz halogen incident and transmitted illumination, with a switch to choose the light source. Full interocular and dioptric adjustment allows focus throughout the zoom. The third eyetube can be used for photography or CCTV so you can view as normal whilst taking pictures at the same time. This zoom stereomicroscope also has the option of a polariser/analyser and a parallax periscope photography attachment.

BMS x0.5 Supplementary Objective - The BMS has a large stable base and quartz halogen incident and transmitted illumination, with a switch to choose the light source. Full interocular and dioptric adjustment allows focus throughout the zoom. The third eyetube can be used for photography or CCTV so you can view as normal whilst taking pictures at the same time. This zoom stereomicroscope also has the option of a polariser/analyser and a parallax periscope photography attachment.

BMS x2 Supplementary Objective - The BMS has a large stable base and quartz halogen incident and transmitted illumination, with a switch to choose the light source. Full interocular and dioptric adjustment allows focus throughout the zoom. The third eyetube can be used for photography or CCTV so you can view as normal whilst taking pictures at the same time. This zoom stereomicroscope also has the option of a polariser/analyser and a parallax periscope photography attachment.

BMS x15 Widefield Eyepieces - The BMS has a large stable base and quartz halogen incident and transmitted illumination, with a switch to choose the light source. Full interocular and dioptric adjustment allows focus throughout the zoom. The third eyetube can be used for photography or CCTV so you can view as normal whilst taking pictures at the same time. This zoom stereomicroscope also has the option of a polariser/analyser and a parallax periscope photography attachment.

BMS x20 Widefield Eyepieces - The BMS has a large stable base and quartz halogen incident and transmitted illumination, with a switch to choose the light source. Full interocular and dioptric adjustment allows focus throughout the zoom. The third eyetube can be used for photography or CCTV so you can view as normal whilst taking pictures at the same time. This zoom stereomicroscope also has the option of a polariser/analyser and a parallax periscope photography attachment.

BMS Photoeyepiece - A specialist eyepiece which gives a flatter image for a more professional photograph.

BMS Gem Clamp - A clamp for holding small items such as gemstones. Picture shows gem clamp with darkfield attachment.

BMS Darkfield Attachment - Converts transmitted illumination to darkfield for gem and crystal work. Picture shows darkfield attachment with gem clamp.

BMSV Stereozoom Microscope with Integral CCTV - Converts transmitted illumination to darkfield for gem and crystal work. Picture shows darkfield attachment with gem clamp.

Unilink Digital Camera Adapter - A universal adapter with a built-in widefield lens which will attach a digital camera to virtually any microscope. It fits into the appropriate eyetube of a compound monocular, binocular or trinocular microscope and will also fit a stereomicroscope by using the stereomicroscope adapter. A clamping device holds the camera steady.

Stereomicroscope Adapter - Enables the Unilink to fit a stereomicroscope.

Stepping Ring - Converts the 37mm screw thread of the Unilink to fit any digital camera with screw thread in the lens housing.

More..